Call Log; Dialing From A Log; Deleting (Single Or All Entries); Saving An Entry To The Phone Book - Talkswitch TS-350i User Manual

Call Log

The phone stores logs to track inbound and outbound calls. There are 3 separate logs that support 100
entries each. The memory for the logs is circular so if the logs are not cleared when the capacity reaches
100, the oldest entries are automatically overwritten by new entries.
Missed Calls stores any calls that were unanswered.
Received Calls stores calls that were answered.
Outgoing Calls stores all calls placed from this phone.
To access the Call Logs:
• Press the Call Logs softkey while the phone is idle.
• Alternatively, press the
• Press 1 to access Missed Calls, 2 to access Received Calls or 3 to access Outgoing Calls.

Dialing from a Log

Calls can be made directly from the logs. In the case of the Missed and Received call logs, the Access Code
Prefix is automatically inserted if configured. This is important if you normally are required to dial a hunt
group to access an outside line. For the Outgoing Calls log, the number is dialed exactly as shown.
To dial from a log:
• While viewing an entry, press the More softkey then press the Dial softkey.
To edit an entry before placing a call:
• While viewing an entry, press the More softkey twice, then press the Edit softkey.
• A cursor is placed at the beginning of the phone number. Enter any prefix that might be required,
then press the Dial softkey.

Deleting (single or all entries)

To delete a single entry:
• While viewing an entry, press the More softkey, then press the Delete softkey.
• Press Yes to delete the entry or No to keep the entry.
To delete all entries:
• While viewing an entry, press the More softkey 3 times, then press the Del All softkey.
• Press Yes to delete the entire log or No to keep the log.

Saving an Entry to the Phone Book

To save an entry to the phonebook:
• While viewing an entry, press the More softkey twice, then press the Save softkey.
• Press OK to store the current name or edit/add a name, then
press OK.
• Confirm the phone number or edit as is necessary. If an Access Code
Prefix (hunt group number) has been configured for the phone, do
not add a hunt group prefix. Calls placed from the Phone Book will
automatically have the the configured Access Code Prefix inserted.
Press OK to continue.
3 2
button, then select 5. Directory then 2. Call Log.
T S - 3 5 0 i U S E R G U I D E