Configuring None Authentication For Console Login - HP 6125G Configuration Manual

None—Requires no authentication. This mode is insecure.
•
• Password—Requires password authentication.
Scheme—Uses the AAA module to provide local or remote console login authentication. You must
•
provide a username and password for accessing the CLI. If the username or password configured
on a remote server was lost, contact the server administrator for help.
By default, console login does not require authentication. Any user can log in through the console port
without authentication and have user privilege level 3. To improve device security, configure the
password or scheme authentication mode immediately after you log in to the device for the first time.
Table 12 Configuration required for different console login authentication modes
Authentication
mode
None
Password
Scheme

Configuring none authentication for console login

Step
1. Enter system view.
2. Enter AUX user interface view.
3. Enable the none
authentication mode.
4. Configure common settings
for console login.
Configuration tasks
Set the authentication mode to none for the AUX user
interface.
Enable password authentication on the AUX user
interface.
Set a password.
Enable scheme authentication on the AUX user interface.
Configure local or remote authentication settings.
To configure local authentication:
1. Configure a local user and specify the password.
2. Configure the device to use local authentication.
To configure remote authentication:
3. Configure the RADIUS or HWTACACS scheme on
the device.
4. Configure the username and password on the AAA
server.
5. Configure the device to use the scheme for user
authentication.
Command
system-view
user-interface aux first-number
[ last-number ]
authentication-mode none
See "Configuring common console
login settings (optional)."
26
Reference
"Configuring none
authentication for console
login"
"Configuring password
authentication for console
login"
"Configuring scheme
authentication for console
login"
Remarks
N/A
N/A
By default, you can log in to the
device through the console port
without authentication and have
user privilege level 3.
Optional.