Cleaning The Touch Screen; Cleaning The Scanner Glass - Xerox DocuColor 6060 Operator's Manual

M
A I N T E N A N C E

Cleaning the Touch Screen

Cleaning the Scanner Glass

8- 2
Clean the Touch Screen during the digital press warm-up cycle at the start of
each day. Remove all dust and fingerprints by wiping the Touch Screen with a
clean, lint-free cloth.
CAUTION:
To avoid damage, do not use any Xerox cleaner, water, or
commercial cleaner on the Touch Screen.
Keep the Scanner glass clean to ensure that prints are the best quality. Clean the
glass at the beginning of each day and during the day as needed.
1
Slightly dampen a clean, lint-free cloth with Xerox Lens and Mirror Cleaner or a
glass cleaner that is not abrasive.
CAUTION:
To avoid damage, do not pour or spray the cleaner directly onto the
glass.
2
Clean the glass by wiping in the lengthwise direction. Keep your fingers off the
glass.
3
Use a clean, dry, lint-free cloth to wipe off any excess moisture.
4
Repeat these steps until there are no visible marks or streaks on the glass.
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L