Xerox DocuColor 6060 Operator's Manual page 245

D C 6 0 60 O
O C U O L O R P E R A T O R
1
On the Basic Features screen, touch the Finishing Module button and then the
Settings button.
Touch the Stacker button and the Settings button to make settings for
stacker output.
2
On the Finishing System Module screen shown below, make your selections for
Collation, Output Delivery and the Profile you wish to use.
You may also enable or disable Function 1 or Function 2.
Refer to the documentation that came with your DFA finishing device for
information on Profiles and Function settings.
Figure 37. Finishing System Module screen
M
A N U A L
A
C C E S S O R I E S
5-43