Loading Paper - Xerox DocuColor 6060 Operator's Manual

P P T
A P E R A N D A P E R R A Y S

Loading Paper

Figure 3. Orientation Label
for all Trays
3- 1 0
Use this procedure to load paper in any paper tray.
1
Pull out the tray slowly until it stops.
2
Load the correct size paper into the tray in the correct feeding orientation. Refer
to the orientation labels on each tray.
• Load the paper seam side (the side on which the ream of paper is
sealed) up in all the trays.
• Do not load materials above the MAX line located on the rear Edge
Guide.
• Do not store extra reams of paper in the open area of the paper trays.
The tray will become inoperable until the paper is removed.
NOTE:
Many suppliers use arrows on the paper ream labels to indicate the
preferred side to image first. Use this side (as indicated by the arrow) as
equivalent to the seam side when loading the paper.
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L