Maintenance; Problem Solving - Xerox DocuColor 6060 Operator's Manual

Maintenance

Problem Solving

Fault Code
212 100
212 110
212 120
212 130
212 140
212 900
212 251
212 252
212 253
212 254
212 302
212 540
212 541
212 542
212 544
D C 6 0 60 O
O C U O L O R P E R A T O R
Do not clean any area inside the EHCS. If the covers or Front Door require
cleaning, dampen a paper towel or soft, clean cloth with a liquid, nonabrasive
glass cleaner or water.
To avoid damage to the EHCS, do not pour or spray the cleaner or water directly
onto the EHCS. Always apply the liquid to the cloth first.
Do not use any other cleaners or solvents on the EHCS as they may interact with
the paint on the covers, eventually causing the paint to peel.
If, after following the recommended solutions, the problem persists, call for
assistance.
The Fault Codes described below appear on the EHCS display panel.
Cause Solution
Paper jam A jam occurred during feeding. Remove sheets
from jam clearance areas. Open and close the top
cover and front door. A purge sheet may eject to
the top tray. If the jam occurs in the second EHCS,
be sure to check the Bypass area in the first EHCS.
Stacker problem Power off, then power on.
Top Cover open Close the top cover.
Stacker tray full Empty the Stacker Tray.
Stacker tray •
position
•
•
•
•
•
No Stacker Cart Open the front door.
Remove the Stacker Cart from the EHCS.
Position the Stacker Cart securely into the EHCS.
Close the front door
Door open Close the door
M
A N U A L
Press the Unload button. The Wait light blinks
until the Stacker Tray has reached the down
position.
When the Stacker Tray has reached the down
positon, open the front door.
Remove the Stacker Cart.
Remove all stacked paper.
Position the Stacker Cart securely into the
EHCS.
Close the front door.
A
C C E S S O R I E S
5-47