Selecting Services To Appear On The Touch Screen; Installing Optional Software Features - Xerox WorkCentre 7800 series Administrator's Manual

Initial Setup

Selecting Services to Appear on the Touch Screen

Services must be enabled before they can be managed through the Tools and Feature Access page. A
standard service is a service that comes standard with the printer. An extensible service is an optional,
third-party service installed on the printer.
To specify the services to display on the touch screen:
®
1. In Xerox CentreWare
2. Click Show/Hide.
To select all of the services in the list to appear on the touch screen, click Show All.
3.
4. To hide all of the services in the list so that none appear on the touch screen, click Hide All.
5. To select individual services to appear on the touch screen, for Displayed, select the services that
you want to appear.
6. Click Apply.
To arrange the order that services appear on the touch screen:
®
1. In Xerox CentreWare
Click Order.
2.
3. To arrange the order that services appear on the control panel, click, drag, then drop the buttons in
the preferred order.
4. Click Apply.

Installing Optional Software Features

When you purchase an optional software feature, to enable it, provide a feature installation key. Some
features come with an activation code that you use to request a feature installation key. Go to the
®
Xerox Software Activation Portal website at
code. The website generates a feature installation key that you can use to enable the feature.
You can also install optional software features by sending a print file. You can install features on
multiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representative
creates this file and provides installation instructions.
Installing a Software Feature in Xerox
®
1. In Xerox CentreWare
2. Click Feature Installation.
Under Feature Installation Key Entry, click Enter Installation Key, or under Action, next to the
3.
feature you want to install, click Install.
4. Type the key.
5. Click Apply.
®
26 Xerox WorkCentre
System Administrator Guide
®
Internet Services, click Properties > Services > Display.
®
Internet Services, click Properties > Services > Display.
www.xeroxlicensing.xerox.com/fik
®
®
Internet Services, click Properties > General Setup.
®
7800/7800i Series Color Multifunction Printer
®
CentreWare Internet Services
to enter the activation