Selecting Features; Obtaining A Sample Set; With One Stacker - Xerox DocuColor 6060 Operator's Manual

Selecting Features

D C 6 0 60 O
O C U O L O R P E R A T O R
If sending a job through the network, refer to the documentation that came with
your color server for information on how to select stacker options on the print
driver screens.
Use the following instructions when using the digital press scanner to make
prints.

Obtaining a Sample Set

Occasionally you may want to check the image quality during a long run of a print
job. To accomplish this, the EHCS provides you with the Sample Set feature.
KEY POINT:
A digital press fault may occur if you request a sample set in the
following situations:
• Requesting a sample set before the first sheet of a set reaches the Stack
Tray
• The output destination is other than the Stack Tray of the EHCS from which
the request was programmed.

With One Stacker

1
Touch the Settings button on in the Output column of the Basic Features screen.
Figure 28. Basic Features Screen with Stacker Selected
M
A N U A L
A
C C E S S O R I E S
5-35