Color Balance - Xerox DocuColor 6060 Operator's Manual

S
C A N N E R

Color Balance

4- 6 8
The Color Balance feature, located on the Image Quality screen, allows you to
adjust the balance for areas of high, medium, and low density image areas for
Cyan, Magenta, Yellow, and Black.
For each color there are three density levels (low, medium, and high). There are
three higher settings, three lower settings, and the normal setting within each
density level.
Each color can be adjusted independently and in any combination. It is important
to remember that adjusting the amount of any of the process colors has an effect
on the other colors.
The default value for Color Balance may be set in Tools Mode. Refer to the
System Administration Guide for more information on how to change this setting.
Figure 52. Color Balance Screen
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L