Ground Fault Indicator (Gfi) Circuit Breaker - Xerox DocuColor 6060 Operator's Manual

O
V E R V I E W

Ground Fault Indicator (GFI) Circuit Breaker

2- 8
The DocuColor 6060 is equipped with an additional safety circuit breaker called a
Ground Fault Indicator. This device trips if the power to the digital press is
interrupted.
If the optional Second Feeder Module is connected to the Digital Press, another
GFI is installed on the Ecology Module.
Figure 5. Digital Press GFI Circuit Breaker
The digital press should be powered on as soon as possible after the power is
restored, and a print should be made to ensure that no damage to the DocuColor
6060 has occurred.
If power to the digital press is interrupted,
• Locate the circuit breakers on the back of the digital press on the
Ecology Module next to the toner waste bottle.
• If either device has been tripped, the switch will be in the Off position
(down). Flip the switch up.
NOTE:
If the device trips again, or if power is not restored by the above
procedure, call your Xerox service representative.
CAUTION:
The Pressure Pad in the Fuser remains in an up position if power to
the digital press is interrupted while the digital press is in use. The Pressure Pad
will not be released from this position until the power is restored, the Power
Switch is in the On position, and the Start button is pressed.
If the Pressure Pad remains in the up position for a prolonged period of time, print
quality defects will occur.
Ecology
Module
Second Feeder
Module GFI
Digital
Press GFI
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L