Control Panel - Xerox DocuColor 6060 Operator's Manual

A
C C E S S O R I E S
Name
1 Ready
Indicator
2 Table Down
Switch
3 Ready To
Open
4 Please Wait
5 Fault Codes
6 Main Tray
7 Baffle Area
8 Entry
9 Top Tray
10 Horizontal
Transport
5- 1 0

Control Panel

8
7
6
The Ready Indicator blinks when the digital press is being initialized. The
Ready Indicator is constant when in use or in standby.
Press once to lower the elevator and unlock the front HCS door. Press
again to stop the elevator from lowering. If pressed while running a job,
all sheets in the paper path are delivered before the elevator will lower.
Illuminates when the elevator has reached the down position and the
Stacker Door can be opened.
Please Wait will illuminate while the elevator is in motion.
When there is a fault in the HCS, the Fault Code appears here. Refer to the
digital press Touch Screen for further information.
Illuminates when paper is being delivered to the elevator tray. Blinks
when the cart is full or not in place. The indicator is OFF when the Stacker
is in standby mode.
Illuminates when paper is being stacked. Blinks when there is a jam. The
indicator is OFF when the Stacker is in standby mode.
Blinks when there is a jam in baffle area 1. The indicator is OFF when the
Stacker is in standby mode. Refer to Jam Clearance in this section.
Illuminates when in Top Tray Mode. Blinks when the tray is full. The
indicator is OFF when the Stacker is in standby mode.
Blinks when there is a jam in the registration area or in the baffle areas.
The indicator is OFF when the Stacker is in standby mode. Refer to Jam
Clearance in this section
9 10 5
1 2
Figure 8. HCS Control Panel
Function
D C 6 06 0 O
O C U O L O R
3 4
M
P E R A T O R A N U A L