How To Enable Automatic Output Switching - Xerox DocuColor 6060 Operator's Manual

A
C C E S S O R I E S
5- 2 0

How to Enable Automatic Output Switching

If your system configuration contains two stackers, you have the option to enable
Automatic Output Switching. With Automatic Output Switching, the digital press
automatically selects a usable Stacker Tray to deliver your collated sets.
When the Stacker Tray becomes full or when the Unload button is selected, the
digital press delivers all paper in the digital press to the same Stacker Tray and
then switches to the other Stacker Tray for the rest of the job.
NOTE:
The Stacker Tray has a capacity of 3500 sheets of 24 lb (90 g/m
centerline paper (or 370mm high). Chapter 3 provides more information on using
specific types of paper. Always refer to the Recommended Materials List and the
Speciality Media Guide.
NOTE:
If Auto Tray Switching feature is not enabled, in Tools Mode, the button
for Both Stackers is not selectable. For detailed information on how to enable
this feature, refer to the DocuColor 6060 System Administration Guide.
To activate this feature perform the following:
1
Set the Auto Tray Switching to "Enable" in Tools Mode.
Figure 16. Enable Auto Tray Switching, in Tools Mode
D C 6 06 0 O
O C U O L O R P E R A T O R
2
)
M
A N U A L