Adding Fuser Oil - Xerox DocuColor 6060 Operator's Manual

Adding Fuser Oil

6 06 0
D O C U C O L O R O P E R A T O R M A N U A L
A message appears on the Touch Screen advising you when to add Fuser Oil. Use
the following procedure to replenish the Fuser Oil supply.
1
Open the Right Front Door of the digital press.
2
Place a drop cloth on the floor under the Fuser area. Any oil spilled on a hard floor
will make the floor slippery.
3
Refer to the following figure for the location of the Fuser Oil Reservoir Cap.
Fuser Oil Cap
4
To open the Reservoir Cap, grasp the tab at the back of the cap and pull it
forward.
Figure 5. Fuser Oil Cap
M
A I N T E N A N C E
8-7