P
S
R O B L E M
O L V I N G
Skew Adjustment
6- 2 2
Use this procedure if you notice that a side skew of the image is occurring. The
digital press specifications call for a tolerance of +/- 0.4mm over 400mm The
target is +/- 0.2mm over 400mm.
1
Measure the amount of skew that is occurring using 11x17" or A3 paper.
2
Open the front doors of the digital press and pull out the Transfer Drawer.
3
Locate the Skew Adjustment Knob at the top left of the Transfer Drawer.
Figure 9. Skew Adjustment Knob location
6 0 60
D O C U C O L O R
O P E R A T O R M A N U A L