S
C A N N E R
Basic Scanning Steps Using the Glass
4- 2
Use the following steps for one-sided copies. Refer to the Basic Features section
for two-sided copies.
1
Press the Clear All button to clear any previous programming.
2
Display the Basic Features tab.
3
Lift the DADF and place the original face down on the Document Glass and close
the DADF. Do not press down on the DADF with excessive force when scanning
thick originals such as books.
4
Ensure that the document is registered using the same orientation on the
Document Glass as the paper in the chosen paper tray (that is, LEF on the glass if
the paper in the chosen paper tray is LEF; SEF on the glass if the paper in the
chosen paper tray is SEF).
Figure 1. Original Registration on the Document Glass
6 0 60
D O C U C O L O R
O P E R A T O R M A N U A L