Xerox DocuColor 6060 Operator's Manual page 186

S
C A N N E R
4- 8 2
3
If a finishing device is attached to your digital press, select where to feed the
output from the options displayed in the center column of the screen. The
displayed options change in relation to the finishing device or devices connected.
It is recommended that the transparencies be output to the Top Tray even though
both selections are valid.
Figure 64. Transparency Set + Dividers Screen
4
If Transparency Set + Dividers or Dividers Only is selected, select the paper
tray where the dividers are loaded.
5
Touch the Save button.
6
Continue selecting options for your job.
7
When you are finished selecting options, press the Start button.
6 0 60
D O C U C O L O R O P E R A T O R M A N U A L