Alignment - Star Micronics TSP600 Series Programmer's Manual

Alignment

FUNCTION
CODE <ESC> <GS> "a"
1B
HEX
Lines up all print data in one line to the specified position.
REMARKS
Alignment positions are shown below.
n
0
1
2
The value of n can be set to 0 (00H) to 2 (02H) or "0" (30H) to
"2"(32H).
ABC
ABCD
ABCDE
1. Enabled only when input at the beginning of the line.
2. Aligns positions in the set printing width.
3. Position alignment occurs for the data that is skipped using the
following commands.
a. Horizontal tab (HT)
b. Absolute position (ESC GS A)
c. Relative position (ESC GS R)
n
1D 61 n
Alignment Position
Left
Center
Right
}
ESC GS a 0
{
ESC GS a 1
– 22 –
ABC
ABCD
ABCDE
ESC GS a 2
{
ABC
ABCD
ABCDE