Print logo image
FUNCTION
<ESC> <FS> "p"
CODE
1B
HEX
Prints the logo image n using the mode specified by m.
REMARKS
n
1 n 255
m
Note) If there is unprinted data in the line buffer, this command will be
executed after the data in the line buffer is printed out.
This command is not affected by print modes (emphasized, under-
line, character size, etc.) except inverted printing.
Print start position in the horizontal direction is the left margin
position. Horizontal print area follows the left and right margin
settings.
If the horizontal size of the logo image exceeds the horizontal print
area, the exceeded data is not printed.
1C
70
Logo image number defined by the command <ESC> <FS>
"q" is specified.
0 m
3 or "0" m "3"
m = 0 or "0"
Normal
m = 1 or "1"
Double-width
m = 2 or "2"
Double-height
m = 3 or "3"
Quadruple ( double-width, double height )
– 32 –
n
m
n
m