Star Micronics TSP600 Series Programmer's Manual page 61

Call download character
FUNCTION
CODE <ESC> "G n1n2
1B
HEX
This command calls download character.
REMARKS
n1n2,n3n4 : Reference numbers of defined download characters(00
Note :
Store logo data into image memory
FUNCTION
CODE <ESC> "K n
<LF> <NUL>
1B
HEX
0A
This command stores logo data into image memory.
REMARKS
n :
x1x2x3x4 : Print start position in the X direction (0000 to 1040
y1y2y3y4 : Print start position in the Y direction (0000 to 2000
d1d2d3 :
Note :
Clear image data
FUNCTION
CODE <ESC> "X" <LF><NUL>
1B
HEX
When the printer receives this command, the defined image data
REMARKS
are cleared.
The following commands will be cleared by<ESC> "X"
<ESC> "RC"<ESC> "RB"<ESC> "Q"<ESC> "H"<ESC> "K"
,
47 n1n2 2C n3n4
to 31).
Only standard size characters (16 (W) 24 (H) dots) can
be defined as download characters.
x1x2x3x4
51 n x1x2x3x4 2C y1y2y3y4 2C d1d2d3
00
";" : OR mode
":" : Overwrite mode
0.1mm)
0.1mm)
Logo registration number (001 to 255)
Logo data is registered in Line mode.
58 0A 00
– 58 –
n3n4 " <ESC> "0"
1B
, y1y2y3y4 , d1d2d3"
30