Sets The Magnification Rate In Character Height; Sets The Magnification Rates In Character - Star Micronics TSP600 Series Programmer's Manual

Sets the magnification rate in character height.

FUNCTION
CODE <ESC> "h"
1B
HEX
Prints the subsequent data magnified in character height by a rate
REMARKS
specified by the value of n.
n
0
1
2
The value of n can be set to 0(00H) to 5(05H) or "0"(30H) to
"5"(35H).
Sets the magnification rates in character width and height.
FUNCTION
<ESC> "i" n1 n2
CODE
1B
HEX
Prints the subsequent data in the size specified by n1, n2.
REMARKS
n1 indicates the height magnification and n2 indicates the width
magnification.
n1 (n2) = 0
The values of n1, n2 are 0(00H) to 5(05H) or "0"(30H)" to
"5"(35H).
Underlining
FUNCTION
CODE <ESC> "–"
1B
HEX
When the value of n is 1, underlines the subsequent data including
REMARKS
a character spacing set by <ESC><SP> n.
The part to be skipped by the horizontal tab setting and the block
graphic characters are not underlined.
Resets the underline mode when the value of n is 0.
The value of n can be set to 0(00H) or "0"(30H), or 1(01H) or
"1"(31H).
n
68 n
Character height
Unmagnify
Double
Triple
69 n1 n2
Normal height (or width) size.
1 Double height (or width) size.
2 Triple height (or width) size.
3 Quadruple height (or width) size.
4 Quintuple height (or width) size.
5 Sextuple height (or width) size.
n
2D n
– 13 –
n Character height
3 Quadruple
4 Quintuple
5 Sextuple