Star Micronics TSP600 Series Programmer's Manual page 77

CODE
FUNCTION
OUTLINE
CODE
FUNCTION
OUTLINE
CODE
FUNCTION
OUTLINE
CODE
FUNCTION
OUTLINE
CODE
FUNCTION
OUTLINE
Executed by BEL code and FS code after printing.
BEL
(07)
H
Trigger peripheral unit drive #1
Causes a peripheral drive pulse to be generated. This code is
normally stored in the buffer and is performed as it is received
from the data queue.
FS
(1C)
H
Trigger peripheral unit drive #1
Causes a peripheral drive pulse to be generated immediately.
SUB
(1A)
H
Trigger peripheral unit drive #2
Causes a peripheral drive pulse to be generated. The drive
pulse width and delay time are fixed at 200 ms.
ENQ
(05)
H
Enquiry
When this code is received, the printer outputs status data.
If it is input after text data input in the STX-ETX mode, the
printer outputs status data and the check byte.
CAN
(18)
H
Clears print buffer
Upon input of this code the data buffer and line buffer is
cleared.
– 74 –