Esc> "4" 1B; Esc> "5" 1B; Select Highlight Printing; Cancel Highlight Printing - Star Micronics TSP600 Series Programmer's Manual
Hide thumbs
Also See for TSP600 Series:
- User manual (128 pages) ,
- Technical manual (40 pages) ,
- Install manual (2 pages)
Table of Contents
Advertisement
Upperlining
FUNCTION
CODE
<ESC> "_"
1B
HEX
When the value of n is 1, upperlines the subsequent data including
REMARKS
a character spacing set by <ESC><SP> n.
The part to be skipped by the horizontal tab setting and the block
graphic characters are not upperlined.
Resets the upperline mode when the value of n is 0.
The value of n can be set to 0(00H) or "0"(30H), or 1(01H) or
"1"(31H).
Select highlight printing
FUNCTION
CODE
<ESC> "4"
1B
HEX
Prints the subsequent data including a character spacing set by
REMARKS
<ESC><SP> n highlighted.
The part to be skipped by the horizontal tab setting is not high-
lighted.
Cancel highlight printing
FUNCTION
CODE
<ESC> "5"
1B
HEX
Cancels highlight printing.
REMARKS
Inverted printing
FUNCTION
CODE
<SI>
0F
HEX
Causes subsequent characters to be inverted.
REMARKS
Cancel inverted printing
FUNCTION
CODE
<DC2>
12
HEX
Cancels inverted printing.
REMARKS
n
5F
n
34
35
– 14 –
Hide quick links:
Advertisement
Table of Contents
