Set Page Length In Lines; Set Page Length In Inches; Set Bottom Margin - Star Micronics TSP600 Series Programmer's Manual

Commands to Set the Page Format

Set page length in lines

FUNCTION
CODE <ESC> "C"
1B
HEX
Sets the page length using the current line spacing, where n is
REMARKS
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Invalid when start position detect is ON.

Set page length in inches

FUNCTION
CODE <ESC> "C" <0>
1B
HEX
Sets the page length to n
REMARKS
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Invalid when start position detect is ON.

Set bottom margin

FUNCTION
CODE <ESC> "N"
1B
HEX
Sets the bottom margin to n lines at the current line spacing, where
REMARKS
n is between 0 and 255.
Changing the line spacing later does not alter the bottom margin.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
Invalid when start position detect is ON.
n
43 n
n
43 00 n
24 mm, where n is between 1 and 22.
n
4E n
– 16 –