Outline - Star Micronics TSP600 Series Programmer's Manual

1-1. TSP600/700 Series
The details of each command are shown in the following sections.
The printer has two different software modes (STAR Line mode and ESC/POS
mode ) which can be selected using the DIP switch.
(Factory setting: STAR Line mode)
DIP Switch #1
1-1
ON
OFF
For the detailed functions and settings of the DIP switches, please refer to the
User's Manual.
1-2. TSP800 Series
The details of each command are shown in the following sections.
The printer has three different software modes (STAR Line mode, STAR Pege
mode, DP8340 mode and ESC/POS mode ) which can be selected using the DIP
switch.
(Factory setting: STAR Line mode)
DIP Switch #1
1-1 1-2
ON ON
OFF ON
ON OFF
For the detailed functions and settings of the DIP switches, please refer to the
User's Manual.

1. OUTLINE

Mode Selection
STAR Line mode
ESC/POS mode
Mode Selection
STAR Line mode
STAR Page mode
DP8340 mode
– 1 –