Star Micronics TSP600 Series Programmer's Manual page 57

Print Data Settings
Set character string data
FUNCTION
<ESC> "R
CODE
1B
HEX
This command sets character strings defined by the <ESC>
REMARKS
"PC".
n1n2
a1a2....an : Character string data (up to 100 characters)
Note:
C n1n2
52 43 n1n2 3Ba1a2....an
: Two digit reference number of character string whose
print position and type are previously defined with
<ESC> "PC".
a) The same reference numbers used by the format
definition command <ESC> "PC" is used.
b) To print data, the Print Label command (<ESC> "I")
must be sent.
c) This command, along with the Print Label command
(<ESC> "I"), allows reprinting of labels where only
the character string data changes.
d) If ";" is missing, printer goes into an error condition.
– 54 –
;a1a2....an" <LF><NUL>
0A 00