Command Specification - Star Micronics TSP600 Series Programmer's Manual

3-2. Command Specification

Format Definition
Clear format
FUNCTION
CODE <ESC> "C" <LF><NUL>
1B
HEX
When the printer receives this command, all defined format and
REMARKS
image data are cleared.
The format defined by the following commands will be cleared.
<ESC> "D"
<ESC> "E"
<ESC> "Y"
<ESC> "H"
Define print area
FUNCTION
CODE <ESC> "D n1n2n3n4" <LF> <NUL>
1B
HEX
This command defines the print area(page length) according to the
REMARKS
value of n1n2n3n4 in 1/10 mm unit.
n1n2n3n4 :Print area 0001 to 2000 (0.1 mm to 200 mm)
Note
ABCD
EFG
ABCD
EFG
43 0A 00
<ESC> "L"
<ESC> "RC"
<ESC> "K"
44 n1n2n3n4
: When a value greater than the size of the label is set,
two or more labels are assumed to be one label.
For example, when 50 mm is set for a label whose
pitch is 40 mm, one print pattern is printed using two
labels.
To avoid such a case, approx. 5 mm of each top and
bottom margins should be considered.
40 mm
– 48 –
<ESC> "PC"
<ESC> "RB"
<ESC> "B"
0A 00
ABCD
EFG
ABCD
EFG
<ESC> "PB"
<ESC> "Q"
50 mm