Star Micronics TSP600 Series Programmer's Manual page 11

CODE 39, NW-7, ITF
1 Narrow : wide
2 Narrow : wide
3 Narrow : wide
4 Narrow : wide
5 Narrow : wide
6 Narrow : wide
7 Narrow : wide
8 Narrow : wide
9 Narrow : wide
When either of UPC-E, UPC-A, JAN/EAN-8, JAN/EAN-13,
CODE128 or CODE93 is selected, 1(01H) to 3(03H) or "1"(31H)
to "3"(33H) can be set. When either of CODE39, NW-7 or ITF is
selected, 1(01H) to 9(09H) or "1"(31H) to "9"(39H) can be set.
n4: Height of bar code
Can be up to 255 dots (31.9mm).
If the bar code height is larger than the line feed amount, the
line feed amount is automatically multiplied by an integer.
di...dk: Bar code data
UPC-E: k = 11 (or 12)
The check digit at the 12th digit is automatically added,
and ignored even if it is specified.
If the data cannot be abbreviated, the command is
ignored. Data conversion to the abbreviation is auto-
matically executed.
UPC-A: k = 11 (or 12)
The check digit at the 12th digit is automatically added,
and ignored even if it is specified.
JAN/EAN-8: k = 7 (or 8)
The check digit at the 8th digit is automatically added,
and ignored even if it is specified.
JAN/EAN-13: k = 12 (or 13)
The check digit at the 13th digit is automatically added,
and ignored even if it is specified.
CODE 39, NW-7
2:6 dots
3:9 dots
4:12 dots
2:5 dots
3:8 dots
4:10 dots
2:4 dots
3:6 dots
4:8 dots
– 8 –
ITF
2:5 dots
4:10 dots
6:15 dots
2:4 dots
4:8 dots
6:12 dots
2:6 dots
3:9 dots
4:12 dots