Star Micronics TSP600 Series Programmer's Manual page 62

Other commands
Print Label
FUNCTION
<ESC> "I" <LF><NUL>
CODE
1B
HEX
This command prints out one label according to the previously
REMARKS
defined format and data.
When print start position detect is ON, the paper will be fed to the
next print start position after printing.
If unrecoverable error occurs during printing, a series of these
operation will be repeated after the printer recovers from the error
condition.
Print Label
FUNCTION
CODE <ESC> "W s1s2s3s4 , h1h2h3h4" <LF> <NUL>
1B
HEX
This command prints out the data within the defined print area.
REMARKS
Print area defined by <ESC>"D" is ignored.
When print start position detect is ON, the paper will be fed to the
next print start position after printing.
If unrecoverable error occurs during printing, a series of these
operation will be repeated after the printer recovers from the error
condition.
s1s2s3s4 : Print start position in the Y direction (unit: 0.1 mm)
h1h2h3h4: Print length from the print start position (unit: 0.1
49 0A 00
57 s1s2s3s4 2C h1h2h3h4
mm)
– 59 –
0A 00