E Xample - GE MULTILINK ML2400 Instruction Manual

Ethernet communications switch
Hide thumbs Also See for MULTILINK ML2400:
Table of Contents

Advertisement

CHAPTER 5: IP ADDRESSING
Note
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
Current Sessions:
SL# Sessn Id
Connection
1
1
163.10.10.14
2
2
163.11.11.1
3
3
163.12.12.16
kill session id=3
ML2400#
Session Terminated
ML2400#
In the above example, the user with username "peter" is given telnet access. Then multiple
users telnet into the switch. This is shown using the
operator session is then terminated using the
A maximum of four simultaneous telnet sessions are allowed at any time on the switch.
The commands in these telnet windows are executed in a round robin fashion; that is, if
one window takes a long time to finish a command, the other windows may encounter a
delay before the command is completed. For example, if one window is executing a file
download, the other windows will not be able to execute the command before the file
transfer is completed. As well, if a outbound telnet session is started from the switch
(through a telnet window) then other windows will not be able to execute a command until
the telnet session is completed.
User Name
User Mode
manager
Manager
peter
Manager
operator
Operator
show session
kill session
IP ADDRESSING
command. The user
command.
5–7

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MULTILINK ML2400 and is the answer not in the manual?

Table of Contents

Save PDF