GE MULTILINK ML2400 Instruction Manual page 107

CHAPTER 6: ACCESS CONSIDERATIONS
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
(Optional step) Add any specific MAC addresses, if needed, to allow
designated devices to access the network (use the
mac=00:c1:00:7f:ec:00 port=11,15
Disable access to the network for unauthorized devices (Use
action port=11 <diable|drop>
port should be disabled or the packed dropped. Follow that with a
command to verify the setting).
show port-security
(Optional step) Set the notification to notify the management
station on security breach attempts (use the command
to make a log entry or send a trap).
port
ACCESS CONSIDERATIONS
add
command).
depending on whether the
signal
6–7