Enervista Secure Web Management; Logging In For The First Time - GE MULTILINK ML2400 Instruction Manual

INTRODUCTION
1.6

EnerVista Secure Web Management

1.6.1

Logging in for the First Time

Note
1–18
Enter the following URL in the web browser to login to the EnerVista Secure Web
Management software.
https://<IP Address assigned to the switch>
Make sure you use HTTPS (secure HTTP) and not HTTP in the URL.
In the example shown in the previous section, the URL is:
https://3.94.247.41
If your site uses name services, you can use a name instead of the IP address. Please make
sure that the name is resolved to the IP address assigned to the switch.
The secure site will issue the certificate check shown below.
Once you click Yes on the security certificate, the browser will prompt you to login.
For the first time,
Login with the name manager and password manager.
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
FIGURE 1–2: Security certificate
FIGURE 1–3: Login screen
CHAPTER 1: INTRODUCTION