GE MULTILINK ML2400 Instruction Manual page 209

CHAPTER 13: RAPID SPANNING TREE PROTOCOL
Configuring RSTP (continued)
ML2400(rstp)##
forceversion stp
ML2400(rstp)##
show-forceversion
Force Version : Force to STP only
ML2400(rstp)##
show stp config
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global) : YES
RSTP/STP Enabled Ports
Protocol
Bridge ID
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
Topology Change Count
Time Since Topology Chg
ML2400(rstp)##
forceversion rstp
ML2400(rstp)##
show-forceversion
Force Version : Normal RSTP
ML2400(rstp)##
show stp config
RSTP CONFIGURATION
-----------------
Rapid STP/STP Enabled(Global) : YES
RSTP/STP Enabled Ports
Protocol
Bridge ID
Bridge Priority
Bridge Forward Delay
Bridge Hello Time
Bridge Max Age
Root Port
Root Path Cost
Designated Root
Designated Root Priority
Root Bridge Forward Delay
Root Bridge Hello Time
Root Bridge Max Age
Topology Change Count
Time Since Topology Chg
ML2400(rstp)##
show-timers
Forward Delay Timer : 15 sec
Hello Timer
Max Age
(continued on next page)
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
: 9,10,11,12,13,14,15,16
: Force to STP only
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 0
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 100
: 9,10,11,12,13,14,15,16
: Normal RSTP
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 0
: 80:00:00:20:06:25:ed:89
: 0
: 15
: 02
: 20
: 0
: 141
: 2 sec
: 20 sec
RAPID SPANNING TREE PROTOCOL
The capability can be
forceversion
used for compatibility with STP
devices. In this example, the switch is
forced to STP mode.
Using , the switch is now
forceversion
operating using RSTP. Note the
command also indicates
stp config
the switch protocol is RSTP.
show
13–11