Saving The Configuration - Allen-Bradley 22-COMM-E FRN 1.xxx User Manual

Figure 4.10 RSLogix 5000 - I/O Configuration Folder

Saving the Configuration

After adding the scanner or bridge and the adapter to the I/O
configuration, you must download the configuration to the controller.
You should also save the configuration to a file on your computer.
1. Select Communications > Download. The Download dialog box
(Figure 4.11) appears.
Figure 4.11 Download Dialog Box
TIP: If a message box reports that RSLogix is unable to go
online, select Communications > Who Active to try to find
your controller in the Who Active dialog box. If it does not
appear, you need to add or configure the EtherNet/IP driver in
RSLinx. Refer to the RSLinx online help.
2. Click Download to download the configuration to the controller.
When the download is completed successfully, RSLogix enters
online mode and the I/O OK box in the upper-left part of the screen
is green.
3. Select File > Save. If this is the first time that you saved the project,
the Save As dialog box appears. Navigate to a folder, type a file
name, and click Save to save the configuration to a file on your
computer.
Configuring the Scanner or Bridge 4-7