Getting Started; Components - Allen-Bradley 22-COMM-E FRN 1.xxx User Manual

Getting Started

The 22-COMM-E EtherNet/IP adapter is a communication option
intended for installation into a PowerFlex 40 drive. It can also be used
with other Allen-Bradley products that support an internal DSI adapter.
The Multi-Drive feature
PowerFlex 4 drives and other DSI Hosts to connect to EtherNet/IP.
Topic

Components

Features
Compatible Products
Required Equipment
Components
Figure 1.1 Components of the Adapter
➊
➋
➌
Item Part
➊
Status
Indicators
➋
DSI Connector A 20-pin, single-row shrouded male header. An Internal Interface
➌
Ethernet
Connector
➍
Operating Mode
Switch and Web
Pages Switch
(Chapter 7) also provides a means for
Page Topic
1-1 Safety Precautions
1-2 Quick Start
1-3 Modes of Operation
1-3
LEDs are on bottom side of adapter board
Description
Four LEDs that indicate the status of the Ethernet connection,
DSI, and the adapter. Refer to
cable is connected to this connector and a connector on the drive.
An RJ-45 connector for the Ethernet cable. The connector is
CAT-5 compliant to ensure reliable data transfer on 100Base-TX
Ethernet connections.
Selects Single or Multi-Drive mode of operation, and enables or
disables the adapter web pages. Refer to
Operating Mode and Web Pages
Chapter
Page
1-4
1-5
1-6
Chapter 8, Troubleshooting.
Chapter 2,
Switches.
1
➍
Setting