Table of Contents
Advertisement
Adapter Parameters
Appendix B provides information about the EtherNet/IP adapter
parameters.
Topic
About Parameter Numbers B-1
Parameter List
About Parameter Numbers
The parameters in the adapter are numbered consecutively. However,
depending on which configuration tool you use, they may have different
numbers.
Configuration Tool
• DriveExplorer
• DriveExecutive
• HIM
• Explicit Messaging
• RSNetWorx for EtherNet/IP
Parameter List
Parameter
No. Name and Description
01
[Mode]
Displays the Single or Multi-Drive operating mode
selected with the Operating Mode Switch (SW1)
on the adapter.
02
[BOOTP]
Configures the adapter to use BOOTP so that you
can set its IP address, subnet mask, and gateway
address with a BOOTP server.
Page
B-1
Numbering Scheme
The adapter parameters begin with parameter 1. For
example, Parameter 01 - [Mode] is parameter 1 as
indicated by this manual.
Refer to
Chapter
6,
Appendix
C,
EtherNet/IP
Details
Default:
Values:
Type:
Default:
Values:
Type:
Reset Required:
Appendix
Using Explicit
Messaging, and
Objects, for details.
0 = Single Drive
0 = Single Drive
1 = Multiple Drive
Read Only
1 = Enabled
0 = Disabled
1 = Enabled
Read/Write
Yes
B
Hide quick links:
Advertisement
Table of Contents
