Product Compliance - Oce Arizona 250 GT User Manual

Product Compliance

Product Compliance
Introduction
This section details the compliance and agency standards that the Arizona 250 GT
conforms to. It also provides manufacturing and contact information.
Electromagnetic Compatibility
This equipment generates, uses and radiates radio frequency energy and if not
installed and used as designed or intended, may cause interference to radio
communications. This equipment has been tested and found to comply with the
limits for a Class A computing device. This equipment has been designed to provide
reasonable protection against such interference when operated in residential and
commercial environments. Operation of this equipment in a residential area may
cause interference, in which case the user, at his own expense, is required to take
whatever measures are required to correct the interference.
Compliance Category
This device complies with Class A emmision limits.
This equipment is considered to be information technology equipment for use in a
light industrial setting. The equipment falls under the scope of the Machinery
Directive due to the movement associated with the gantry carrying the printer head
carriage assembly. As such, a full risk assessment per EN 1050 and a full mechanical
and machinery assessment per 292-2 + A1 Annex 1 was performed. As the
equipment is primarily information technology equipment (large format printer
receiving data from a computer terminal), and is within the scope of EN 60950
(mains operated ITE equipment under 600V including plotters and photoprinters -
clause 1.1.1, EN 60950: 2000), a full electrical evaluation was performed per EN
60950:2000.
Agency Compliance and Standards
The Arizona 250 GT complies to the following Agencies and Standards:
Note: Third Party confirmation of all declared will be obtained.
Safety
Berufsgenossenschaft GS Mark and BG-Prufzert - Mechanical and Electrical Safety
Printing Equipment: EN1010
Machinery Electrical Safety: EN60204 including Annex 1
Machinery Mechanical Safety: EN954-1, EN1050-1
Machinery UV Radiation Safety measured according to: EN12198-1 and
EN12198-2
IT Equipment Electrical Safety: EN60950-1:2001 (with CB Scheme Report)
10 Chapter 1 Introduction