Pcl Control Panel - Ricoh Aficio FX10 Operator's Manual

Printing modes
PC-PRINTING
PCL Control Panel
OfficeStyler TIO was designed to print with Windows. However, many
Windows users need to run MS-DOS applications occasionally. OfficeStyler
TIO lets you print from MS-DOS applications you only have to run the
application from Windows, or within the DOS box under Windows. OfficeStyler
T1 O also provides a PCL Control Panel for DOS PCL printing. This allows you
to change printer settings for your DOS print jobs. (Note: some DOS
applications may override these settings. ) While the PCL Control Panel is
included primarily for DOS print jobs, it also can affect the default settings for
Windows PCL print jobs. However, the Windows printer driver overrides the
corresponding settings in the PCL Control Panel.
Form Feed
Click on Form Feed if you need to eject a page from the printer. Some PCL
files do not include a form feed (a command to eject a page) at the end of the
file, so if you are printing to a conventional PCL printer, you have to press a
form feed key to see your output. This happens frequently in MS-DOS. For
example, if you use the DIR LPT1: command in the MS-DOS box in Windows,
the job sent to the PCL interpreter will not have a form feed at the end, so that
the last page (or a single page) won't print.
OfficeStyler TI O puts this form feed key here on the PCL Control Panel.
59