Duplex Printing - Ricoh Aficio FX10 Operator's Manual

PC-PRINTING
Printing modes
Duplex Printing
You can print your file on both sides of the paper by first selecting "Manual
Duplexing", then selecting either Book or Report. Book prints out so that if you
opend the document in the manner of a book, pages 2 and 3 would face each
other. Report prints the even-numbered pages upside down, so that if you
opened the document in the manner of a report bound at the top, pages 2 and
3 would face the sama way. Off disables Manual Duplexing.
You can also put an X in the box marked Print Instruction Page. If you do this,
then the OfficeStyler TI O Printer will print out a sheet of paper giving you
detailed instructions every time you print in manual duplex mode.
Note:
.
When printing on both sides, the image may not print well, and white areas
may become dirty.
. If several sheets are fed through together, feed one sheet at a time.
c1
El
El
c!
A
H
n
I
H
n
9
b
n
I
56
Double click "Printer Concole" icon in the OfficeStyler TI O Tools.
Click "Control Panel" tab.
Change to GDI mode and Cilck "Set as Default".
Click "Printer Setup" icon.
Click "Use OfficeStyler Print Manager" in the OfficeStyler TIO GDI
window.
Check on "Manual Duplexing check box and select "Book" or "Report"
style.
If you wish toget a printout of detailed instructions, check on "Print
Instruction Page" on check box.
Click "OK".
Close Printer Console Window.
Start your Windows application.