Releasing The Scanner Lock; Removing The Clip On The Paper Cassette - Ricoh Aficio FX10 Operator's Manual

INSTALLATION Releasing the Scanner Lock
~ First of all, remove all the pieces of tape attached with the machine.
Close all covers and replace the bypass feeder after that.
Open the
ADF
cover and
Remove the bypass feeder
remove the small cardboard and peel off all the tape.
Releasing the Scanner Lock
Open
the side cover and the upper unit and
remove any remaining tape. Then remove
the small boardcard tab. Do not remove the
mylar strip on the roller.
Release the scanner lock behind the machine before you turn the power on.
Push the scanner lock lever down
to release it.
3 :@ G , ,,,,
:%$
, . . . . . . .$. "-"
jg:.
,,,. !.,,,
"" ,,,s
,,,,,
,,:,, *::
If you turn
the power on without releasing the scanner lock, a service call number will appear in the
display and you will not be able to use the machine. If this happens;
1.
Turn the Power off.
2. Push the scanner lock lever down to release it.
3.
Turn the
power on.
Removing the Clip on the Paper Cassette
~ Pull out the cassette. kl~
El
While holding down the metal
base plate with your hand, turn
the clip counter-clockwise as
shown and remove it.
For how to set paper, see page
82.
135