Memory Transmission And Immediate Transmission - Ricoh Aficio FX10 Operator's Manual

Memory Transmission and Immediate Transmission
FAXING
Memory Transmission and Immediate Transmission
There are two ways to send a fax message,
~
Immediate Transmission
~ Memory Transmission
Immediate Transmission
Immediate Transmission is convenient when:
~ You wish to send a message immediately
~ You wish to quickly check whether you have successfully connected with the
other party
~
Your machine's memory is getting full
The machine dials immediately after you press Start. The message is scanned
and transmitted page by page without being stored in memory.
Memory Transmission
Memory Transmission is convenient because:
~ Fax messages can be scanned much more quickly (you can take your
document away from the fax machine without waiting
too long).
~ While your fax message is being sent, another user can operate the machine
(people will not have to wait by the fax machine too long).
~ You can send the same message to more than one place with the same
operation.
After you press Start, the machine doesn't dial until all the pages of your fax
message have been stored in the memory.
The default mode of this machine is Memory Transmission, so the procedures
described in this manual will be based on the assumption that you are using
Memory Transmission. Immediate Transmission is described in a separate
section.
18