Allocating Virtual Memory; For Windows 3.1 - Ricoh Aficio FX10 Operator's Manual

SElllNG UP
Allocating Virtual Memory
Allocating Virtual Memory
For
Windows 3.1
The OfficeStyler TIO software requires a minimum of 12.5 MB of virtual
memory for Client and Server configurations.
To change the virtual memory, follow the instructions below. For more
information on virtual memory, refer to the Optimizing Windows section in the
Microsoft Windows 3.1 User's Guide.
a
El
El
n
A
H
n
I
Double click on the "Control Panel" icon in the Main group.
Double click on the "386 Enhanced" icon.
Click the "Virtual Memory" button.
The Virtual Memory dialog box will be appeared.
If the size shown in the Virtual Memory dialog box is less than
12 MB, or Type is "temporary" or "none", then click "Change."
Otherwise click "Cancel" to exit the dialog box.
Select the Type "Permanent" in the New Swapfile Settings box.
Increase the "New" size in the "New Swapfile Setlings" box to at least 8.5
MB.
Note:
If you cannot increase the New size to the desired figure, then select the Type
"Temporary" and set the virtual memory size.
El
Click "OK".
n
s Click "Yes".
b
El
i Click "Restart Windows" to make the setting effective.
10