Table of Contents
Advertisement
TECHNICAL REFERENCE
Access Code for Functions 61 to 84
Accessing functions 61 to 84 requires an access
code.
The sole
purpose
of this feature
is to keep others
from
accidentally
misadjusting the machine. This code cannot be changed, so do not rely on it as
a security feature.
The code is 2222
User Parameters
(function 63)
Adjusting your machine sometimes
requires that you change special settings
called user parameters.
For each user parameter, you must change a ~
in a
switch.
Example:
Switch
."> ." "? ."fi ~[~$J~
:; pj ~.~ ~ : ~-l # Qq..
—
bit values
76543210
—
bit number
A switch has eight bits. Each bit has a vahe of 1 or O, and each bit is numbered
O
to
7 from the right.
In the following example we'll change bit 3 of switch 05 in
the user parameters.
U
El
Press Function
and 6, enter the
access code 2222
then press
6, 3, and Yes. You'll get:.
(You can press 4 to see a list.
Otherwise,
press Yes.)
Press Yes again and use the ~ &
}
keys
to change
switches. For
example go to switch 05 by press-
ing ~ five times.
120
Advertisement
Table of Contents
Troubleshooting
