Copying/Printing Using The Bypass - Ricoh Aficio FX10 Operator's Manual

COPYING Copying/Printing Using the Bypass
Copying/Printing Using the Bypass
Use the bypass feed table for the following types of copy paper,
~ Paper of a different size from those currently in the paper tray
~ Paper of non-standard size or weight, such as OHP transparencies, ad-
hesive labels, or postcard.
Caution: Never copy onto OHP sheets intended for use with color copiers or
inkjet printers — the machine could be damaged.
Load one sheet at time onto the bypass feed table.
I
Caution: Do not put paper on the bypass feed table while printing is in
progress. Wait for the page to finish printinq before placinq the next sheet.
I
How to Use the Bypass
El
El
El
Insert the sheet with the printing
side down. The edge should
touch both sides of the entrance.
Then slide the guide of the left
side.
Make sure that the paper has ad-
vanced into the manual feeder.
Note: If a paper is left in the man-
ual feeder for 3 minutes, it will be
fed out automatically.
To enter the paper size, press ~.
Note:
If you do not enter the pa-
per size, the back side of next pa-
per might be dirty.
Press Yes.
69