Other Features; Errors, Counters, Etc - Ricoh Aficio FX10 Operator's Manual

OTHER FEATURES Verifyina Communications, Errors. Counters. etc.
Communication Result
Report (Memory Transmission) @wMch 03, bit 0)
This report is printed out after memory transmission showing whether it was
successful or not. If you have switched this report off, a Communication Failure
Report will be printed only when a communication fails.
Transmission Result Report @vitch 03, bit 5)
This report is printed out after immediate transmission showing whether it was
successful or not.
Communication Result Report (Polling result report) @vjtch 03, bit 4)
This report is printed after your machine polls a message from another
machine.
Communication Failure Report (ON if Transmks~on Result Report h OFF)
This report is printed if a memory transmission failure occurred, after a job is
completed. It is only printed if the Transmission Result Report is switched off,
and event of a communication failure.
Error Report (Turned on/ofl by a Service Technjcjan)
This report is printed after each unsuccessful communication. The
communication failure report (above) is printed after a job has been completed.
So while doing a broadcast, the machine may print a number of error reports,
and at the end, it prints a communication failure or transmission result report.
Check it, and retransmit any pages that were not sent, If a particular problem
continues or gets worse, keep the error reports for the service technician.
Printing Parl of the Image on the Report (Swjtch 04, Mt 7)
For reference purposes, the machine prints the first few inches of the fax
message on the following reports.
~ Transmission Result Report
~
Memory Storage Report
~ Communication Failure Report
55