How To Set The Document - Ricoh Aficio FX10 Operator's Manual

FAXING
How to Set the Document
How to Set the Document
Setting the document in the Auto Document Feeder (ADF)
El
Carefully place the document
face down into the auto docu-
ment feeder. Then adjust the
guides to fit the width of the docu-
ment.
Note:Do not feed in more than 30 pages.
Do not stack documents in the feeder so that they exceed the load limit
marker.
Insert the document until you hear the machine beep. If the machine
cannot detect your document in the ADF, it will scan from the exposure
glass instead.
Setting the document to the exposure glass
Lift up the top cover and place
the first page of your document
face down in the top left corner of
the exposure glass.
Then lower the top cover.
The display is as shown.
17