System Requirements - Ricoh Aficio FX10 Operator's Manual

SElllNG UP SYstem Requirements
System Requirements
-Windows 3.1:
1.
2.
3.
4.
5.
6.
7.
Operating system:
Windows 3.1 or greater in Enhanced Mode, and MS-DOS 3.3 or later.
Pc:
An lBM-compatible PC with at least a 386SX 16MHz CPU.
!/0:
Standard PC parallel printer port and cable.
Memory:
At least 4 megabytes PC memory (RAM), which is also the minimum
amount of memory recommended by Microsoft for use with Windows.
Adding more memory to your PC will increase overall system and printer
performance.
Disk space:
About 6 megabytes disk space for files, and up to approximately 8.5
megabytes disk space for virtual memory.
Allocating Virtual Memory:
OfficeStyler software requires 12.5 MB of total memory, divided between
your PC memory (a minimum of 4 MB) and your Windows virtual
memory.
Restrictions:
1. Due to the nature of the high-speed interface, the OfficeStyler printer
cannot be shared through a network or switch box.
2. OfficeStyler works with standard parallel cables. Be aware that some
manufacturers cut corners by manufacturing cables that do not
conform to standard parallel specifications.
-Windows 95:
1.
2.
3.
4.
Operating system:
Windows 95.
Pc:
An lBM-compatible PC with at least a 486DX 33 MHz CPU.
1/0:
Standard PC parallel printer port and cable.
Memory:
At least 8 megabytes PC memory (RAM), which is also the minimum
amount of memory recommended by Microsoft for use with Windows.
Adding more memory to your PC will increase overall system and printer
Performance.
,
8