Table of Contents
Advertisement
Initial Settinas & Adjustments
INSTALLATION
Initial Settings & Adjustments
Important: The CSI code (see below) is required by international
law. You
cannot legally connect a fax machine to the telephone system if
the CSI code is not programmed.
Further, the TTI code and the
date and time of transmission
must be included in the header of
all pages faxed to, from, or within the United States.
Before
you connect
your
machine
to the telephone
system,
you must
enter
a
few settings
and make
a few adjustments.
Own
number: The phone number used by your fax line.
CSI (Called Station Identification,
required by international
law): This is your
fax machine's
phone number,
which
must
inc/ude
country
and area codes.
During any communication,
your CSI appears on their display. (Conversely
their CSI appears on your display.)
RTI (Receive Terminal Identification):
This should be your name or company
name, in 20 characters or less. During a communication,
if the other party's fax
machine
supports
RTI, then this replaces the CSI above. The other party's
name will appear on your display, and yours on theirs.
TTI (Transmitter
Terminal Identification) :This should be the same as your RTI
or CSI code. It will be printed on the header of every page you send. Required
in the USA.
Line: You must match the fax machine to the type of line you use: atone line or
a pulse line. Then, you should connect the line to the machine.
Date & Time: Necessary for many functions and required in the USA.
Initial Settings (Function 61)
During the course
of this procedure
you'll have to enter letters and other
characters.
Use the key pad for entering numbers. Use Quick Dial keys 1 to 8 for entering
/etters,
the 4 & h keys to change to another letter, the Clear Key to erase a
letter, Yes key to accept a character,
and Quick Dial key 09 for spaces and
other characters.
See page 128 for details.
144
Advertisement
Table of Contents
Troubleshooting
