Connecting The Power - Ricoh Aficio FX10 Operator's Manual

INSTALLATION
Connecting the Power
Connecting the Power
IMPORTANT POINTS ABOUT POWER CONNECTION
If you have to use an extension cord, make sure that it is capable of carrying
125V/1 5A, and that your facsimile terminal is the only piece of equipment
connected to that cord. The supply from the wall outlet must not fluctuate more
than 20 V either side of 115 Vat.
The
power
cord should not be laid in a place where it might trip somebody.
Do not lay anything on the power cord.
WARNING:
The power source must conform to the specifications on page
131.
WARNING: Make sure the power source is properly grounded.
WARNING: Follow the safety instructions given of pages i to iv.
c1
El
Insert the plug into the wall outlet.
Turn
on the power.
Power Source
143