Receiving A Fax - Ricoh Aficio FX10 Operator's Manual

Operation
PC-FAXING
Print output destination is set to the FAX application.
Execute Print instruction from the application.
Set the transmission destination, etc. in the FAX application, then execute
a Send (Start/Fax) command.
Receiving a Fax
Set the PC-FAX RECEPTION Mode on the Operation Panel, using the
following procedure.
n
H
El
n i
B
Press the FUNCTION key, then
press [6], [2222], [62].
Press the YES key.
Press the } key until the opposite
display appears.
Press the YES key.
Select the ON by < } key, then
press the YES key.
Note:
If the PC-FAX RECEPTION Mode is not set (if SELECT PC is set in the
above procedure), FAX transmissions cannot be received by your
computer.
n
, Set the Receiving Mode on in the FAX application.
H
Receive the FAX data.
(FAX data can be received automatically.)
Note: Manual Receiving Method
El
Set Auto Receiving off in the FAX application.
69