Document & Paper Specifications - Ricoh Aficio FX10 Operator's Manual

TECHNICAL REFERENCE
Document & Paper Specifications
Document & Paper Specifications
Documents (Using the Auto Document Feeder)
Length:
4.1-23.6 in
Width:
5.8-8.6 in
Thickness :
16-24 lb
Document Feeder Requirements
~ Do not insert torn, heavily curled, wavy, creased, dog-eared, damp, or otherwise
damaged documents. Make copies of these originals and scan the copies.
~ Do not insert folded, stapled, clipped, glued, or taped documents, or documents
with a metallic coating. Make copies of these originals and scan the copies.
~ Do not insert documents on which there is undried ink or correction fluid.
Wait
for the document to dry.
~ If the document has an uneven or slanted edge, do not insert that edge in first.
Documents (On Exposure Glass)
Size:
Maximum Thickness
Maximum weight of the
Paper Requirements
c1
D
u
u
Upto8.5xll.Oin
Closed cover, 0.98 in (25mm)
document:
11 lb (5 kg)
Acceptable sizes are are mentioned in the part of the specifications (see page
131).
When a received fax message is printed, a margin of 4mm on all four sides is
left blank.
To
avoid loss of information, the sender should make sure their
message does not run over these margins.
Do not print to torn, heavily curled, wavy, creased, dog-eared, damp, or
otherwise damaged paper.
Do not print to folded, stapled, clipped, glued, or taped paper.
Do not print to paper with any kind of coating or printing. Do not print to metallic
paper. Do not print to the reverse
side of a print.
129